Speed Hooks for instant access
The single biggest problem of a drybag/cargo cage system is creating secure, reliable and repeatable mounting. The Tailfin Cage Pack answers this with its Speed Hook system, designed to make loading as close to an engineered solution as possible. Banish second-guessing and create a reliable and repeatable mounting process whilst still facilitating rapid removal.
Remove in seconds thanks to the Speed Hook System
Banish second-guessing and create a reliable and repeatable mounting process whilst still facilitating rapid removal.
Shaped and sized for optimum load carrying
Three sizes ensure a Cage Pack will fit no matter where you want to place it on your bike. 1.7 Litre for in and around the frame, 3 Litre for under downtube, fork and rack, and 5 Litre for fork and rack mounting.
Maximum size, no crank rub
Narrow profile designed to fit within most common bottom bracket widths, reducing crank rub. The 1.7 Litre plays well with road and gravel geometry, whilst the 3 Litre is ideal for wider stance gravel and MTB BB widths.
Frameless Design
The Cage Pack is the first soft form luggage Tailfin has created. No frame = stowable when not in use. Simply rolled away when not needed and pull out when required. The soft design also aids compression of loads.
Tried & Tested
Awards and Reviews from the people you trust the most.
“With a range of three sizes and accompanying straps to suit varying weathers, Tailfin’s Cargo Pack and Cargo Cage combo is definitely a very well thought out and executed system for boosting the carrying capacity of your full susser, hardtail, or gravel bike.”
“If you are looking for packs to use on a fork, with a downtube-mounted cargo cage or rear racks, the Tailfin Cage Packs have proven to be extremely tough with a design that makes them easier to use and load than a more traditional drybag setup”
Top tip: Try searching for your bike make/model below to find others using this product on your bike.
Purchased the packs to use on my fork cages. Very durable and easy to use..great bits of kit
Excellent quality as usual event better because of the reinforcements compare to my previous 3L bags.
Again Tailfin delivers exceptional customer service and stands behind their products. After wearing small holes in these packs while doing the Tour Divide ride, I sent photos to Tailfin and on the same day they sent two replacement packs at no cost and with no questions asked.
Good system, small issues with one bag. But it's solvet. I am happy with whole Tailfin.

Additional Information
The Cage Packs can be mounted with a Cargo Cage anywhere on the bike with mounting points such as the frame, forks or Alloy Tailfin Rack system.
Unfortunately not. Our Cage Packs are only to be used with our Cargo Cages or a Third-Party Cargo Cage. This is so they are mounted securely and do not run the risk of slipping and causing problems.
The weight you can carry in the bags on the cages depends on how many bolts you have mounted the cage on. We recommend you can carry 1.5kg per bolts used. Therefore if you are using 3 bolts, you can carry up to 4.5kg.
All cage packs will have some movement during use and therefore pack abrasion will happen. However, to extend the life of the product the 3L and 5L packs have an anti-abrasion patch welded to the rear of the bag where it touches the cage that will extend the life of the bag.
No, the cargo straps for the cage packs must be purchased separately, we have 40, 50 and 65cm length straps available.
The 3L Cargo Pack will fit either the Small or Large Cage well. If you are interested in the 1.7 or 5L Packs then we recommend Small & Large Cages, respectively.
There are 3 cargo strap options, 40, 50 and 65cm. The 40cm straps are to be used with the 1.7L Cage Pack, the 50cm straps suit the 3L and 5L cage packs, and the 65cm straps fit the 5L cage packs.
Fork Packs use a mini x-clamp mounting system rather than a cage and straps like the cage packs. The Fork Packs have a rigid internal frame so cannot be removed and folded away so easily when not being used. Fork Packs come in sizes 5L and 10L. The Cage Packs are a soft bag which are strapped to the Cage which is mounted to all 3 bolts on a fork or Tailfin Alloy Rack/AeroPack. These bags are removable and can be folded away when not being used in another bag. The Cage Packs come in 1.7L, 3L and 5L.
T-Hook Straps are only included with the 5L Cage Packs.

Specification

Model | ||
---|---|---|
Model
1.7L Cage Pack |
Model
3L Cage Pack |
Model
5L Cage Pack |
Weight
115g |
Weight
154g |
Weight
183g |
Maximum Load*
1.5kg per cage rivet nut |
Maximum Load*
1.5kg per cage rivet nut |
Maximum Load*
1.5kg per cage rivet nut |
Bag Construction Material
Hypalon/Ripstop Nylon |
Bag Construction Material
Hypalon/Ripstop Nylon |
Bag Construction Material
Hypalon/Ripstop Nylon |
Waterproof
100% |
Waterproof
100% |
Waterproof
100% |
*this is a guide, please check with your individual bike manufacturer