Q: Can I convert my Tailfin 5L or 10L Mini Pannier to use the new mounts?

Yes, conversion kits are now available to purchase here .

Question 1

Are these sold individually or as a pair?

Accepted Answer

Fork Packs are sold individually.

Question 2

How can I check if these will fit my bike?

Accepted Answer

First, check to see if your fork has triple or double bosses, then check the distance between these bosses (should be 64mm between two). Finally, refer to the fork manufacturer’s recommendations in terms of weight limits and suitability for carrying loads.

Question 3

My bike’s fork doesn’t have mounts, can I use these?

Accepted Answer

Sorry, you wouldn’t be able to fit them. You need a fork with triple/double boss eyelets for the Fork Pack to fit.

Question 4

What’s the minimum number of screws I can use to fit the mount?

Accepted Answer

We recommend fitting using all three for maximum security and to minimise any potential damage to Fork Pack or fork. You can fit using two screws but you must use the top two mounting points on the mount and there is a reduction in the maximum weight you can carry to 3kg.

Question 5

My Alloy Rack / AeroPack has boss mounts, can I mount these packs to it?

Accepted Answer

Yes, although the weight limit will only be 4.5kg, lower than the 9kg that you would have if you upgraded your arch to one with pannier capabilities, to use with a set of Mini Panniers.

Question 6

Can I use these mounts with my Tailfin Suspension Fork Mounts (SFMs)?

Accepted Answer

Yes, you can. We would recommend using three SFMs per side for maximum stability and strength. You can use the fork packs with just two (attach using the top and bottom position on the Fork Pack Mount) but the weight limit would be lower at 3 kg.

Question 7

Can I convert my Tailfin 5L or 10L Mini Pannier to use the new mounts?

Accepted Answer

Yes, conversion kits are now available to purchase here.

Question 8

What is the mount made of?

Accepted Answer

The Fork Pack Mount is made from 7076-T6 aluminium alloy. This is CNC machined and hard anodised.

Question 9

Can I fit panniers from other brands to this mount?

Accepted Answer

No. The Fork Pack Mount is only compatible with Tailfin Fork Packs.

Question 10

Can I mount the fork pack to a third-party rack?

Accepted Answer

If the rack has triple boss fittings then yes, you can mount a Tailfin Fork Pack system.

Question 11

Which size pack is best for gravel bikes?

Accepted Answer

Both 5 and 10 litre packs are compatible with gravel bikes. It depends on what you want to carry!

Question 12

Will these fit the first-generation Cannondale Topstone?

Accepted Answer

No. The width between the bosses on the original Topstone Carbon fork (2019-21) is not compatible with a Fork Pack Mount.

Question 13

I only have two bosses on my fork, will the Fork Pack fit?

Accepted Answer

Yes. As long as the two bosses are the standard 64mm distance between (the same as a water bottle cage mount) then you can fit the Fork Pack Mount. PLEASE NOTE the mount must be attached using the top two mounting points and there is a reduced weight limit of 3kg per Pack.

Question 14

The bosses on my fork are at an angle. Can I use the fork pack?

Accepted Answer

We don’t recommend our Fork Packs if the bosses on your fork are at an angle (for example on the Mason Bokeh 2.0 and Surly Ogre). There is a chance of the pack touching the wheel, particularly the brake rotor. Bikes using a Klamper front brake may also experience this. You can however use our smaller volume Cage Packs and Cargo Cages.

Question 15

What do you recommend to carry in the Fork Pack?

Accepted Answer

The Fork Pack is the ideal place to carry light and bulky items such as sleeping bags/mats, spare clothes, cook sets, or tents/bivi bags.

Fork Packs

Fork Packs

Get to know our Fork Packs

Assembly Guides – Fork Packs